swoole服务怎么开启

服务启动依赖于进程，在进程中用swoole_server来创建，源码中的别名函数为swoole_server_create,默认的sock_type是tcp，服务模式serv_mode为进程模式。

long sock_type = SW_SOCK_TCP;
long serv_port;
long serv_mode = SW_MODE_PROCESS;

分配swServer内存并初始化

swServer_init(serv);

主要是factory_mode,反应器个数 reactor_num,分发模式dispatch_mode,环形缓冲区大小ringbuffer_size,超时时间(由timeout_sec和timeout_usec),工作进程数workker_num,最大连接数max_connection,最大请求数max_request，http_server服务配置信息，心跳空闲时间heartbeat_idel_time和检查时间间隔heartbeat_check_interval,缓冲区的输入输出大小buffer_input_size和buffer_output_size及管道缓存大小。

 swoole_init();
 bzero(serv, sizeof(swServer));
 
 serv->factory_mode = SW_MODE_BASE;
 
 serv->reactor_num = SW_REACTOR_NUM > SW_REACTOR_MAX_THREAD ? SW_REACTOR_MAX_THREAD : SW_REACTOR_NUM;
 
 serv->dispatch_mode = SW_DISPATCH_FDMOD;
 serv->ringbuffer_size = SW_QUEUE_SIZE;
 
 serv->timeout_sec = SW_REACTOR_TIMEO_SEC;
 serv->timeout_usec = SW_REACTOR_TIMEO_USEC; //300ms;
 
 serv->worker_num = SW_CPU_NUM;
 serv->max_connection = SwooleG.max_sockets;
 serv->max_request = 0;
 
 //http server
 serv->http_parse_post = 1;
 serv->upload_tmp_dir = "/tmp";
 
 //heartbeat check
 serv->heartbeat_idle_time = SW_HEARTBEAT_IDLE;
 serv->heartbeat_check_interval = SW_HEARTBEAT_CHECK;
 
 serv->buffer_input_size = SW_BUFFER_INPUT_SIZE;
 serv->buffer_output_size = SW_BUFFER_OUTPUT_SIZE;
 
 serv->pipe_buffer_size = SW_PIPE_BUFFER_SIZE;
 
 SwooleG.serv = serv;

同时解析服务主机ip，端口号，服务模式及sock_type,将服务器监听端口信息加入listen_list列表中swServer_add_port。

//create server socket
 int sock = swSocket_create(ls->type);
 if (sock < 0)
 {
 swSysError("create socket failed.");
 return NULL;
 }
 //bind address and port
 if (swSocket_bind(sock, ls->type, ls->host, ls->port) < 0)
 {
 return NULL;
 }
 //dgram socket, setting socket buffer size
 if (swSocket_is_dgram(ls->type))
 {
 setsockopt(sock, SOL_SOCKET, SO_SNDBUF, &ls->socket_buffer_size, sizeof(int));
 setsockopt(sock, SOL_SOCKET, SO_RCVBUF, &ls->socket_buffer_size, sizeof(int));
 }
 //O_NONBLOCK & O_CLOEXEC
 swoole_fcntl_set_option(sock, 1, 1);
 ls->sock = sock;
 
 if (swSocket_is_dgram(ls->type))
 {
 serv->have_udp_sock = 1;
 serv->dgram_port_num++;
 if (ls->type == SW_SOCK_UDP)
 {
 serv->udp_socket_ipv4 = sock;
 }
 else if (ls->type == SW_SOCK_UDP6)
 {
 serv->udp_socket_ipv6 = sock;
 }
 }
 else
 {
 serv->have_tcp_sock = 1;
 }
 
 LL_APPEND(serv->listen_list, ls);
 serv->listen_port_num++;

用swoole_server->start来启动（swoole_server_start）,注册一些默认及自定义回调，日志初始化，根据服务模式实现工厂的初始化(php_swoole_server_before_start)。

工厂的启动函数会根据服务模式是创建多进程 还是单进程，线程还是线程(swServer_create)。

根据是否使用openssl来读取证书文件 ，是否开启守护模式来做日志初始化和开启守护。swServer_start_proxy创建main_reactor，负责处理监听套接字，同时创建reactor线程。

（推荐学习： swoole视频教程）